Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
reza
About
- Username
- reza
- Location
- los angeles
- Joined
- Visits
- 2,176
- Last Active
- Roles
- Moderator, Beta Tester
- Points
- 35
- Location
- los angeles
- Website
- okreza.com
- Music Streaming Link (if applicable)
- soundcloud.com/okreza
- Posts
- 731
- 4
- Badges
Comments
-
best way currently is to enter arranger view and shift clips vertically from there. eventually there may be support for rearranging easily within grid mode, but not currently.
-
that is a file that is created in relation to the feature added in 1.1 that allows you to customize the start up song the deluge boots up with. see here: https://delugecommunity.com/features/community_features/#313---automatically-load-the-last-open…
-
(from https://delugecommunity.com/features/audio_export/) double check with the above, if something is working improperly, make an issue on the deluge github.
-
if it makes you feel better, it's definitely not normal
-
share a video of this occurring and it might be easier to point out what's going on, but it sounds like overly sensitive pad contacts. do you notice it happens with particular pads?
-
you've never been able to convert a synth/kit/midi clip to an audio clip if there's already note data in the clip. if you want to make an audio clip it'll have to be an empty first. the second issue seems to be possibly the same as a bug i report…
-
sounds like you are using 1.3? keep in mind that that firmware isn't even in beta. audio monitoring has been changed in 1.3, see below
-
@dinterplay said: So, quick question on this as I see this as being useful for some bulk renaming of files. Does the deluge allow for special characters in the file names like ":" or "-". I'm really partial to the naming schema on my EMU Command …
-
check your midi MPE settings, they may have been reconfigured without you knowing and are causing the issue; check MPE settings and make sure they're off/0: settings>midi>devices>usb(and/or din)>mpe>in (and out)>lower (and highe…
-
the problem is that panning all the way left will produce no sound, for such a workaround, you'll have to make two separate kit clips, with the same sample on each. pan each kit row all the way R, THEN set each KIT clip (affect entire on) left all t…
-
sounds like the battery got dislodged when it fell, should be as simple opening it up and getting the battery back in snugly. reference this video: make sure to use the right sized tools or else you'll risk stripping the many screws involved in…
-
there isn't really a good solution directly on the deluge, you're best bet is to grab the sample from the SD card and process it and then reload it on to the deluge
-
@Prnts said: Ok so once I’ve gone shift clip I seem to be stuck with empty clips only on that track. How do I revert? i would review tutorials that detail how to use arranger view properly:
-
this is intentional. when copying AND pasting, the current zoom level and current note range visible in clip view is remembered. this means that if you have a colored clip that is 8 bars and you want to paste all 8 bars into another clip, you hav…
-
sounds like you have midi follow enabled somehow, try reading more here: https://delugecommunity.com/features/midi_follow_mode/
-
the song you were using probably already had synth 2-7 already used in the song?
-
preemptive results are here: https://docs.google.com/spreadsheets/d/17pd-GBt-8in7rbImmegvWQvDUTo9XxCNGdwquvsj_Mo/edit?gid=1424095248#gid=1424095248 an official announcement is coming very soon
-
you are looking at a document that's not specific to 1.2, it's part of the ongoing development, so likely that feature is available in the nightly firmware. check the specific 1.2 documentation here: https://github.com/SynthstromAudible/DelugeFir…
-
you may have to relearn the midi controller to the preset
-
this would likely create a feedback loop. if deluge is sending signal to the sp404, then the sp404 is receiving audio continuously from the deluge. if you are adding the 404's FX to the external input (the deluge's signal into the 404) and want to s…
-
not currently. i believe the feature is partly developed but the particular dev has been taking a break with finishing their community firmware work to avoid burn out. expect it eventually, till then explore some creative workarounds
-
yes it has been implemented, see here for more details: https://delugecommunity.com/features/midi_device_definition_files/
-
in community firmware, you can learn a whole kit row with one learn/input action. keyboard mappings are saved within a song, not within a preset. only parameter mappings are saved within the preset itself.
-
voting is live for two weeks here: https://deluge-presets.nofuture.in/ @Noiza
-
i believe also that some newer BOD presets that utilize samples may have loop points that cause pops/clicks since the loop points aren't perfectly at zero-crossing points.
-
what firmware are you using, what are you doing with it when it crashes. is it reproducible every time with specific steps? is your deluge charged? as it can be crash prone when at low battery
-
must be using community firmware