No audio after ground issue with externals gear power supply

udeluge · January 24

Hello,

I had some ground loop with an external device in my setup and I changed some dc power cables while the deluge, mixer and other gear was powered. Now I have no audio on all outputs of the deluge (line, headphone, speaker). Only some very distorted fragments. Is there some output circuit I've fried or the whole digital output chip. It looks like the CS4270 does the AD/DA stuff. Are there any other parts in the audio path?

greets
Jürgen

reza · January 25

If you have a problem with the hardware itself, ie: knobs, pads, etc... you should first check the FAQ

If you believe you have a fault with your Deluge, fill in the form here.

No audio after ground issue with externals gear power supply

Answers