Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
reza
About
- Username
- reza
- Location
- los angeles
- Joined
- Visits
- 2,569
- Last Active
- Roles
- Moderator, Beta Tester
- Points
- 35
- Location
- los angeles
- Website
- okreza.com
- Music Streaming Link (if applicable)
- soundcloud.com/okreza
- Posts
- 772
- 4
- Badges
Comments
-
i think the solution could come via open source. having a menu to attach a midi template to a given click (and be able to adjust the midi channels for all learned knobs at once) would do the trick. i'm sure it would be a decent undertaking though.
-
there isn't currently a way to set a default midi map to all existing unmapped synths. i'm sure there's a tool out there for what you are looking for, although i'm not the best person to ask. however, consider that if you have all synths mappe…
-
Finally had a chance to use the random synth generator, great job! Maybe implementation into Deluge could utilize algorithms that you can save and load from the SD card. You tinker with the randomization amounts on the website then save it as a g…
-
Looking forward to it. I saw that Rohan has uploaded the beginning stages of his implementation, interesting to hear the challenges that will occur with FM. As for the Menu for selecting the Scala files. I see Rohan implemented a new Song View me…
-
excellent work @Alter ! i see there being two main keyboard views for kits. one for finger drumming, a kit row takes up one pad on the Keyboard main grid (and there's the ability to reposition pads as needed to make whatever layout you want), and…
-
could totally see the shortcut pads set up like this: you hit the current PAN shortcut, it shows up as a modulation of MASTER LEVEL. to set up osc1 PAN, you would go to OSC1 LEVEL then SHIFT+PAN. PAN will blink fast and you can adjust L32-R32, meanw…
-
Did some digging in (src/drivers/All_CPUs/oled_low_level_all_cpus/fonts.c) Rohan used the following website to generate a given font into a C array: https://lvgl.io/tools/font_conv_v5_3 I had a go at recreating the 'metric_bold_9px' (this is t…
-
-
sounds like it's not formatted properly, see this thread here: https://forums.synthstrom.com/discussion/comment/22501#Comment_22501
-
definitely
-
has to be optional as @djAzid mentioned, there are use cases where you want multiple clips on the same midi channel. there also needs to be unlearn all midi CC knobs. if you have a synth template where every knob is mapped to external gear (to co…
-
would love to see this implemented. big piece of the puzzle is how to enter recording or delete automation of mutes afterwards. are they automatically made into white clips or are they the normal clips with mute automation (maybe a different colored…
-
although i agree, a workaround is to lower your oscillator/sample volume levels.
-
@Letraset based on what OP describes, the deluge doesn't behave that way anymore. if you mute a clip with delay, after it's muted you still hear the delay ring out...
-
@jensg said: @neilbaldwin said: It's crazy that this feature is still missing. Synthstrom - any comment on plans to implement? Also a much simpler way would to just hold down a grid pad and then press on another row and t…
-
background for a partial temporary workaround: you can find which CC's an NRPN parameter uses, usually it's 2 different CC's, one that transmits two values (even & odd) and the other that is a normal 0-127 value. with the two, you basically d…
-
possibly dust, or the pads need to be re-seated to sit properly? 6months is too fast for them to go in my experience. before ordering more, try opening it up again and adjusting them back on. take a look at the back of the pads and on the board to s…
-
SCW are super-powered when used as wavetables (vs being used as samples before 4.0) because now you can adjust the pulse width of each SCW giving a lot more options to adjust timbre for each SCW. adjusting pulse width wasn't/isn't available for samp…
-
@Flocky said: Hm I paid my deposit November 11th 2022 shouldn't I have had a notification to hand over the deluge already according to this plan? It should have been in round 1 or 2 probably but what do I know. So far I still like the deluge as i…
-
you mean you have a kit clip where one of it's row's is a synth and when you audition it that synth row (within the kit clip) it doesn't sound much at all? aside from checking velocity (place a note on sequencer, then press and hold it while turn…
-
find your location, check on your end which round you were in, and see estimated dates. you'll hear an update when it's your turn | EUROPEAN CUSTOMS UNION | (Including Norway and Switzerland*) Round 1 (Full): Nov 1, 2022 to mid-July, 2023 Round…
-
@m1k3o said: For those who have send their $50 deposit. When shall we receive updates on the status of upgrades. I sent my deposit over 2 months ago and have receive no updates by email or on this forum. on the link in the first post of t…
-
it's because kit row is set to one-shot so the full sample will play whereas synths defaults to gate so the time the gate is open for that last note is basically no time so you don't hear it. it's how ping pong is intended to work on the deluge. you…
-
so the kick triggers sidechain, but you have the kick's level to 0 so you dont hear it, and you hear a click of whatever you're sidechaning? generally it's cuz your attack is too fast but a combination of parameters help eliminate it. would help …
-
i agree that this would help clean up the SONG view mode for live performance, i wonder if it could still work horizontally like the orientation found in SONG view, ala the Polyend Play. based on your example, i think it would make more sense if …
-
hold shift before turning on to reinstall the firmware, make sure not to turn off while updating. if OLED, wait a few minutes.
-
go to osc 1 and/or osc 2 TRANSPOSE, scroll to the right using left/right encoder to get to either .0 decimal or .00 decimal, then turn using select encoder to fine tune.
-
i could be wrong, but any circular pads that only emit blue will only have that color option for the LED's
-
hm weird, i'm able to assign to gold knob as you detailed with no issues. what's the first kit that shows up for you? maybe it's worth trying to reinstall the firmware again?