Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
reza
About
- Username
- reza
- Location
- los angeles
- Joined
- Visits
- 2,568
- Last Active
- Roles
- Moderator, Beta Tester
- Points
- 35
- Location
- los angeles
- Website
- okreza.com
- Music Streaming Link (if applicable)
- soundcloud.com/okreza
- Posts
- 772
- 4
- Badges
Comments
-
yes, this was added in community firmware 1.1 I believe you have to be in your kit clip then: * Press AFFECT ENTIRE so that it is lit orange * Press SELECT to enter the KIT FX menu (only accessible when AFFECT ENTIRE is lit) * Enter the …
-
@Phoebus1966 said: What's that retrofit addon? the deluge used to have a red 7segment display. now deluges come with an OLED display that displays more information at once. the retrofit service allows users with an older 7seg display t…
-
the manual has a section for CV (go a couple pages down to the CONTENTS, and click CV to jump to that section): https://synthstrom-audible-deluge.s3.us-east-2.amazonaws.com/Deluge-Guidebook-4p0.pdf you may find the following tutorial helpful too:
-
you can scroll one beat at a time (or at your desired length) by adjusting your current zoom position prior to extending.
-
this sounds like you may possibly have an OLED deluge with an outdated bootloader. you can check your bootloader version by doing the following (with official firmware installed): Approach your Deluge, make sure it’s turned OFF. Hold the BOTTOM…
-
loop points are available only outside of audio clips. so in a kit row or a synth clip's sample. i would suggest using a kit clip ! if you want it to behave similarly to what you would've expected in an audio clip, make sure to make a drone note …
-
shift + pressing the <> encoder will double the length of a clip btw
-
as far as has been communicated by synthstrom, the retrofit will be available indefinitely. if any changes occur, they would communicate it through social media/newsletter.
-
great ! seems like the factory card contents that synthstrom provides have a couple messed up sample locations then. if you run into any others, it would be super helpful if you list them here (preset name & sample name that doesn't sound) th…
-
3mm grubscrew with a 1.5mm hex head. there's possibly a chance that the screw is still inside the knob, if you get a 1.5mm hex you can stick it in and see if you can simply tighten it.
-
the two files are "CB1-bdrum1.wav" and "CB2-bdrum1.wav" and should be located in SAMPLES/ARTISTS/CHAZ relocating the kit preset .xml files won't cause issues, but moving the actual sample file location will cause issues. they are normal kick s…
-
gotcha ! downloading new synths/kits/samples is fine. you don't need to update the firmware for those to populate the deluge's library, the deluge just reads directly from the SD card's contents. yeah, take a look if you can confirm the sample…
-
naming midi clips will be possible in the firmware after next (so 1.3). it's currently implemented in the nightly firmware, but needs some improvements to work and look as good as it should.
-
there are kick sounds on my end, named CB1-BDRUM1 and CB2-DBRUM2 respectively. i would check to see if those files exist in SAMPLES>ARTISTS>CHAZ first. otherwise, i would check if you saved over the kit and accidentally lowered the volume f…
-
this seems to now be solved: https://github.com/SynthstromAudible/DelugeFirmware/pull/2757
-
you can create multisamples directly on the deluge, however you can't assign different .wav files to different velocities. although a long video, you may have some look in the process of creating your own multisample preset with the following vid…
-
it's for setting how many semitones all notes will transpose by when using the press+turn <> shortcut
-
what features are you missing in arranger view that warrant a song mode in song views?
-
could you elaborate how this behaves in practice?
-
once the kit has been saved, hit LOAD+KIT, find the kit, then when you see the kit highlighted/selected hit shift+delete !
-
i'd contact synthstrom and/or replace the battery !
-
@brapster said: I'm on Community 1.1 and whenever I switch the display to "OLED" then it only shows the OLED display on my computer but the display freezes on the Deluge. Really sucks cause I love the idea but I can't use my Deluge screen at all.…
-
after it had the OLED replacement, have you ever had it power on properly? did you ever install firmware on it after arriving? if so, which the battery could have unseated itself while being shipped back to you, i'm not sure if the power adaptor…
-
as far as i know, it's a limitation with how parameters were coded. however apparently it's something that can be achieved if an open source developer wanted to refactor the way parameters are structured. a work around is to set your oscillators …
-
this sounds like a unique issue for the qc-1 and other devices similar to it, like the omnichord (depending on how midi is implemented on it) i happen to have a QC-1. i could try using it sometime this month with the deluge and see if there's a s…
-
there is a bug related to this, i think technically its modulation aliasing that is now more pronounced than before because of optimization improvements on community firmware. for now simply increase the SIDECHAIN ATTACK amount from 7 to somethin…
-
just a heads up, there are bipolar automation lanes, but those are only for synth/kit clips, where we know for a fact the value is bipolar (pan, modulations (eg. lpf > env1), and pitch). maybe one day we can make midi cc's have user defined behav…
-
this isn't implemented with automation view i'm assuming this would be within midi clips, right? functionally it should work the same, but i'm sure it would be nice to have the visual queue that the automation is affecting a bipolar parameter
-
the usb slot from your computer may just not be sending enough power to charge it as fast. try plugging the usb into an outlet/power brick and you may notice a difference