Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
reza
About
- Username
- reza
- Location
- los angeles
- Joined
- Visits
- 2,176
- Last Active
- Roles
- Moderator, Beta Tester
- Points
- 35
- Location
- los angeles
- Website
- okreza.com
- Music Streaming Link (if applicable)
- soundcloud.com/okreza
- Posts
- 731
- 4
- Badges
Comments
-
gotcha ! downloading new synths/kits/samples is fine. you don't need to update the firmware for those to populate the deluge's library, the deluge just reads directly from the SD card's contents. yeah, take a look if you can confirm the sample…
-
naming midi clips will be possible in the firmware after next (so 1.3). it's currently implemented in the nightly firmware, but needs some improvements to work and look as good as it should.
-
there are kick sounds on my end, named CB1-BDRUM1 and CB2-DBRUM2 respectively. i would check to see if those files exist in SAMPLES>ARTISTS>CHAZ first. otherwise, i would check if you saved over the kit and accidentally lowered the volume f…
-
this seems to now be solved: https://github.com/SynthstromAudible/DelugeFirmware/pull/2757
-
you can create multisamples directly on the deluge, however you can't assign different .wav files to different velocities. although a long video, you may have some look in the process of creating your own multisample preset with the following vid…
-
it's for setting how many semitones all notes will transpose by when using the press+turn <> shortcut
-
what features are you missing in arranger view that warrant a song mode in song views?
-
could you elaborate how this behaves in practice?
-
once the kit has been saved, hit LOAD+KIT, find the kit, then when you see the kit highlighted/selected hit shift+delete !
-
i'd contact synthstrom and/or replace the battery !
-
@brapster said: I'm on Community 1.1 and whenever I switch the display to "OLED" then it only shows the OLED display on my computer but the display freezes on the Deluge. Really sucks cause I love the idea but I can't use my Deluge screen at all.…
-
after it had the OLED replacement, have you ever had it power on properly? did you ever install firmware on it after arriving? if so, which the battery could have unseated itself while being shipped back to you, i'm not sure if the power adaptor…
-
as far as i know, it's a limitation with how parameters were coded. however apparently it's something that can be achieved if an open source developer wanted to refactor the way parameters are structured. a work around is to set your oscillators …
-
this sounds like a unique issue for the qc-1 and other devices similar to it, like the omnichord (depending on how midi is implemented on it) i happen to have a QC-1. i could try using it sometime this month with the deluge and see if there's a s…
-
there is a bug related to this, i think technically its modulation aliasing that is now more pronounced than before because of optimization improvements on community firmware. for now simply increase the SIDECHAIN ATTACK amount from 7 to somethin…
-
just a heads up, there are bipolar automation lanes, but those are only for synth/kit clips, where we know for a fact the value is bipolar (pan, modulations (eg. lpf > env1), and pitch). maybe one day we can make midi cc's have user defined behav…
-
this isn't implemented with automation view i'm assuming this would be within midi clips, right? functionally it should work the same, but i'm sure it would be nice to have the visual queue that the automation is affecting a bipolar parameter
-
the usb slot from your computer may just not be sending enough power to charge it as fast. try plugging the usb into an outlet/power brick and you may notice a difference
-
not at the moment, it's been discussed for community firmware but hasn't been tackled.
-
nope, just like any firmware (official or community) you can skip updates.
-
check your MPE settings, i think if LOWER or UPPER is set to a specific channel then it's going to send midi data through a bunch of channels at once. try setting both LOWER and UPPER to OFF. SETTINGS>MIDI>DEVICES>DIN or USB>MPE>LOWER…
-
@BilboSwaggins128 said: Hi! just curious when the next round is (assuming you all are still working in "rounds"). I've only waited a month or so, so I'm not pressed about it, I'd just really like an approximate timeframe, even if the window I'm g…
-
@Schützer you should fill out this form to get advice/solutions directly from synthstrom themselves: https://docs.google.com/forms/d/e/1FAIpQLSeTP-eDaaDOmU4-WRXcVhQIoIBd8bkLC_Up4_Lt1RbYZXA-xQ/viewform?pli=1
-
have you confirmed with other devices using the headphone input? perhaps the plug or cable of the headphones you are using is faulty? if not it sounds like you have to go through the repair process again.
-
the year is 2018 which is based on the first two digits
-
there currently is no envelope follower feature on the deluge. it has been discussed, maybe it will be a feature in the community firmware in the future.
-
from here: https://forums.synthstrom.com/discussion/5710/sd-card-problem#latest that error can display if you've accidentally locked the sd card, take it out and make sure the lock switch is set to unlock. otherwise it might be a formatting…
-
that error can display if you've accidentally locked the sd card, take it out and make sure the lock switch is set to unlock. otherwise it might be a formatting issue, windows needs to use a 3rd party app for larger cards like that, but mac disk …
-
for the white cursor issue, does the song play, but the white cursor doesn't appear? if so, you have to turn on the white cursor. enter settings > playhead cursor > if it's disabled, switch to SLOW. you cannot create clips in CLIP view. may…