Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
joesh
About
- Username
- joesh
- Location
- Brussels
- Joined
- Visits
- 272
- Last Active
- Roles
- No Roles
- Points
- 7
- Location
- Brussels
- Music Streaming Link (if applicable)
- https://soundcloud.com/joehigham
- Music Download Link (if applicable)
- https://joehigham.bandcamp.com
- Posts
- 67
- 2
- Badges
Comments
-
I'm not sure what the Ableton flat function is, but if it means you can somehow see the notes that are above/below your screen (in another octave), without scrolling, I'd love that. +1
-
I'm not 100% sure I understand. But from what you say I think you're expecting the Deluge to send a Gate signal clock/run when you trigger the Deluge from you Akai? However, what's not clear is what you're using the Deluge for, and what are you send…
-
The clock does work (in MIDI), I often sync my BitBox Micro and Deluge, works absolutely fine.
-
Hi, I often use those Gates, although I more often use the CLK/IN to sync everything externally from another unit (a NerdSeq). Anyhow, I quickly checked using a Temps Utile to see it was receiving the clock out from my Deluge, and as far as I can…
-
@djAzid said: In the meanwhile, you can put blocks/instruments with velocity 0 inbetween, so it's not 1 big colored mess. That's an interesting idea, thanks.
-
@Too_Mere said: I do often use the arranger track mutes in live situations to mute/unmute incoming audio or MIDI. A bit quicker and easier to do one handed. I'm going to try it (later) and see how it works for me. Thanks again, a good …
-
@core44 said: I jam a lot on the deluge and like to play sets where I just start with a couple clips and try to build and add sounds over time. This would be much easier if I could hear and prepare clips in the headphones while its not heard on t…
-
@Too_Mere said: You can mute the audio track in the arranger by pressing the mute/launch button. Thanks, that's indeed another possibility. However, as you see above, I finally realised my mistake and see that you have to deselect the …
-
@djAzid said: @jsilence said: Hoping for a Loopop walkthru. Ron Cavagnaro does a good job explaining as well. Yes indeed, I don't think you really need a Loopop explanation, Ron Cavagnaro does a great job. And,…
-
Firstly, bravo and congratulations to the Synthstrom team. However, another big thanks goes to all the beta testers, and, last (but not least), a shout out to those who've made the great instructional videos here on the page. Thanks everyone.
-
@Kusho said: Thanks that was just what I was looking for. Glad that my post helped, although reading it back now, it looks very confusing. However, I also realised later (with the help of @Too_Mere) that I'd overlooked the Clock input - s…
-
@jondent said: I'm trying to advance the deluge's sequencer using the external clock input. The analog clock pulse is from a modular sequencer. It sends out a 8V pulse on every new step. The deluge lights up every time a pulse is received,…
-
@Too_Mere said: The Deluge does not react to gate 4 because it’s an output. Use clock in instead. Of course, the solution was staring me in the face all the time. I was so busy messing with the gates, I'd forgotten there was a clock input…
-
Could you tell me how you've synced the Volca (what steps) as I can't get the Deluge to react (via Gate 4) at all. I've already asked the question on this thread (https://forums.synthstrom.com/discussion/2819/using-the-external-clock-input#latest), …
-
I'm not sure, but I have the same idea as you, and I don't get any external clock signal/pulse as far as I can see. The Deluge happily carries on playing at its own tempo. Anyone out there with some info (or suggestions)? Update: Luckily @Too_…
-
Yes, I use the Deluge and a 0-Coast all the time, I also have a Pittsburgh Modular SV-1B linked up as well. When I first bought the Deluge, I used to just run those two modules via the Deluge's two CV/Gate ports. However, nowadays I still do that…
-
Just wondering if you ever solved the problem? I'm having similar problems (see further down). Firstly, I imagine you checked the instructions: If you wish to use the Deluge as a syncing leader to send a trigger clock signal to other devices, …
-
@hamptonio said: I'm not an expert, but I think MPE is a pretty minor extension (in terms of implementation/message type) of MIDI 1.0, so it should be fairly easy to use Supercollider or PD with it, like in this example: https://gist.gith…
-
@reza said: i would suggest searching within the XML files of the messed up projects and search something like .wav and find the anomalies that aren't from drum kit files to hone in on what to look for Yes, I tried that, but there's so m…
-
One thing that would be very useful (on the Deluge) is a way of seeing what sound files have been used in a project. Something like the Reaper 'bak' files which leave a trace of your work which is time-stamped. I've sometimes been in a rush due t…
-
Although you're using a Roli Seaboard sending MPE into a Deluge, I imagine that all this could be done using something like Supercollider or Pure Data. Is that correct, or do we (will we) need something else to convert the midi information? Thank…
-
@Affectionate_Bee_781 said: I include a metronome track in all of my song templates. Very flexible metronome! Sounds interesting, can you explain more (please)?
-
That's what I suspected. Thanks.
-
@Heptagen and @Icoustik, thanks, that's useful to know. Shame it only triggers once (which is quite logical), it would be great to be able to map the volume levels of a sample to the sidechain send levels/parameters. Any suggestions on how tha…
-
@Icoustik said: Audio signals can't be used to trigger sidechain. But you can use silent notes laid out in the same pattern as the external kick drum if you want. Use a sound that sends to the sidechain, put notes into the grid and turn their vel…
-
@Kenoubi, brilliant, I'll have another look at that thanks.
-
More clicks and bleeps with the aid of the Deluge
-
@Icoustik said: "To make a user scale first select root note. Then get out of scale mode. Then enter the keys you want in the grid. Then press scale mode again then it will display either the scale it is in or it will say other." Sorry fo…