Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Icoustik
About
- Username
- Icoustik
- Location
- Norway
- Joined
- Visits
- 927
- Last Active
- Roles
- Moderator, Beta Tester, Mentor
- Points
- 55
- Location
- Norway
- Music Streaming Link (if applicable)
- www.soundcloud.com/cornabros
- Posts
- 1,017
- 5
- Badges
Comments
-
@Heptagen said:
-
@sssetz said: fantastic, appreciate the thoughts!
-
Its all good, fam. No worries.Just don't leave the battery discharged overnight, that's bad for its health
-
@DaEmbassy said: Thanks @volsteh I had a look at Audacity and it's a good option for when I have my laptop close by. Thanks for your recommendation, @lcoustik , I invested in a Zoom H5. Nice!
-
@Heptagen said: Well, originally I opened this thread to set something against the constant nagging about the display but it's always on the verge of derailing and I guess here we go again. I don't get why people keep talking about and hop…
-
@Heptagen said: Since y'all have been so helpful I thought I'd fill you in on what happened in the meantime. I got the Korg nanopad2 and it worked just as I had hoped: I could use it as a midi foot controller and the small form factor was amaz…
-
@Heptagen said: Oh okay, thanks for the quick answer and the workaround! As always it's Icoustik for the rescue ^_^
-
Can't do that currently! But you can map one knob to multiple parameters at once And you can also learn multiple knobs to one parameter. I.e. you can control individual filters with one knob, and all of them at once with another.
-
Hello! Not currently!
-
@DaEmbassy said: This is a (possibly embarrassing) beginner question. How do YOU record the audio from your Deluge for posterity / review / distribution / mastering / etc., ? I have a Deluge, another Synth, an electric guitar, a co…
-
@RobMF said: Thanks for the response! It's often just as useful to know definitively that it's not possible (yet). Happy to help
-
@RobMF said: I'm finding that it's incredibly useful to be able to assign rows of a kit to output MIDI notes, for controlling external drum machines. However, I'm not able to assign MIDI CCs to the parameter knobs and I'm having trouble finding a…
-
@Stick44 said: Hi,I'm trying to record a complete song from Arranger, but halfway thu, the drum track disappears for 4 Bars...the Track itself is a Sample that is 16 bars long looped.(plays back fine ) I press Shift /Record / Play to resample but…
-
@phillipadsmith said: So, after reading a ton of forum and Facebook posts, and re-reading the thread on templates here, I'm stumped on this seemingly simple thing: * I create a MIDI mapping for a Kit on Clip 1 (say, for example, volume…
-
@Leftarmist_Bestarm said: @Icoustik said: @Leftarmist_Bestarm said: I formatted a new SD card with fat32, installed the firmware, and loaded the factory patches. All of that works perfectly. I have created additi…
-
@Leftarmist_Bestarm said: I formatted a new SD card with fat32, installed the firmware, and loaded the factory patches. All of that works perfectly. I have created additional folders for multisamples and loaded them. The Deluge can only see the f…
-
@blindcinema said: Awesome, thanks! Cheers! Happy Deluging
-
@blindcinema said: Ok, that's a bummer. Then is there any way to turn off loop playback for multisamples other than deleting the loop points? Just switch the playback mode Bottom left shortcut(s). Usually Cut is best for multisamples, th…
-
No ping pong mode. Audio pops and clicks are typical when audio material is not cut right at a zero-crossing. You can try moving the loop points to get closer to the zero-crossings i.e. flat middle-line with no waveforms/ inbetween waves. Otherw…
-
@tomblue said: You're a legend! Thanks very much. So applying per-step parameter locks like this has to be via the gold knobs? I was trying to hold a note and use Shift+grid functions You are correct! Cheers
-
Yes it is, just hold a note and turn a gold knob Simply learn the decay parameter to a gold knob (or any other learnable parameter that isn't tied to a gold knob by default.) To do this, enter the parameter, hold the Learn button and turn a gold …
-
@JyPsycaL said: Cool thanks for a really fast reply!
-
@JyPsycaL said: Reading through the manual and I'm learning how to create a synth row in a kit. I can't seem to figure out how to access a previously created synth preset for a given kit row. Is that possible? The manual says, "Set-up the synth p…
-
Cool beanz, bro!
-
@denkyuu said: Uhhhh ok. It just cut off more than half my post. That's cool, I guess. 🤷♂️ @Heptagen So yeah, It looks like muting should be mappable. I'm just not sure how. The rest of my post was supposed to be "I can't seem to learn la…
-
Super nice! Welcome
-
@Heptagen said: While we're at it: is there a way to manually pitch a single sample in a multisample instrument? I've had the deluge pitching one sample wrong and all others right, rendering the whole instrument useless. OSC1/2 Transpose …
-
@Heptagen said: Alright thank you that was helpful! Awesome
-
@kilroy said: Is there any way to multi-sample using this approach. E.g. first resample C3, load Bot-top, then resample C5 and assign it to a specific range. I know how to multi-sample when all the notes are in a single folder and then it …
-
@Heptagen said: What do you use your Launchpads for and which version do you recommend? And how customizeable are the MIDI settings? For example, can I split it into 4 zones, each sending midi data on their own midi channel? I use Launchp…