Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Midi Clock over USB Clock Issue
alive555
ThailandBeta Tester Posts: 18
I've hit a bit of a block. I've setup midi over USB to the deluge (using deluge as master clock), but i found that I can't send master clock to a second device. Is this normal?
Can you only use the deluge in master clock mode to more than 1 device via midi cable (either by midi hub or midi through on secondary device), and not if you use USB .
In other words USB to device A
Midi out to device B
Deluge is Master for both external devices A+B
I can send midi note data no issue, its the clock which is going at about 300 bpm when I used midi cable to the secondary device.
Solution much appreciated 👌
Post edited by alive555 on
Comments
Hi @alive555 I have never needed to do what you want to do. So I'm no expert.
To my simplistic thinking, could you not connect your Deluge to a USB Hub via the Deluge USB port, and then have the data (clock) sent to all devices which are also connected to the same USB hub?
Michael