›
Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines

Midi Clock over USB Clock Issue

▲ 0 ▼
alive555alive555 ThailandBeta Tester Posts: 18
edited February 2022 in General Discussion

I've hit a bit of a block. I've setup midi over USB to the deluge (using deluge as master clock), but i found that I can't send master clock to a second device. Is this normal?

Can you only use the deluge in master clock mode to more than 1 device via midi cable (either by midi hub or midi through on secondary device), and not if you use USB .

In other words USB to device A
Midi out to device B
Deluge is Master for both external devices A+B

I can send midi note data no issue, its the clock which is going at about 300 bpm when I used midi cable to the secondary device.

Solution much appreciated 👌

Post edited by alive555 on

Comments

  • ▲ 0 ▼
    DaEmbassyDaEmbassy SydneyPosts: 54

    Hi @alive555 I have never needed to do what you want to do. So I'm no expert.

    To my simplistic thinking, could you not connect your Deluge to a USB Hub via the Deluge USB port, and then have the data (clock) sent to all devices which are also connected to the same USB hub?

    Michael

Sign In or Register to comment.