Din midi latency using with modal skulpt

Glynn

Greetings.
I have the Deluge connected to the skulpt synth using midi din.
When I play audition pads on the deluge to the skulpt the timing is correct BUT when I play a sequence of notes there is an audible delay before the notes sound. Maybe 20ms or so.
I know I can nudge notes..can I nudge a whole midi track?
Do any of you fine peeps know what could be the cause of this behaviour?

reza

hold up/down encoder and then turn left/right encoder to move all notes forward or back. zoom in to have the nudges move in smaller increments.

i'm not certain why you're having a delay/latency issue. a video example could help get to the bottom of it

volsteh

Did you by any chance tampered with midi sync?

Glynn

Ok thanks reza your suggestion has worked for all notes on the track. The first note in sequence won't be heard because it's shifted before 1st beat I understand that.
I've checked various settings in both devices and am mystified why timing is ok when playing notes/pads/auditioning but is delayed/latent when playing the sequence.
I would like the skulpt synth to be in time so for now am still wondering.
Volsteh thank you I did have a tamper with that setting but not before the issue.
I have recycled the power on off several times since then so presumably it's back at default.
It didn't fix the timing issue.
I don't have any other midi hardware close right now to try...hmm

volsteh

@Glynn said:
Ok thanks reza your suggestion has worked for all notes on the track. The first note in sequence won't be heard because it's shifted before 1st beat I understand that.
I've checked various settings in both devices and am mystified why timing is ok when playing notes/pads/auditioning but is delayed/latent when playing the sequence.
I would like the skulpt synth to be in time so for now am still wondering.
Volsteh thank you I did have a tamper with that setting but not before the issue.
I have recycled the power on off several times since then so presumably it's back at default.
It didn't fix the timing issue.
I don't have any other midi hardware close right now to try...hmm

maybe these settings can fix?

Glynn

Yes I'm thinking it could to be something to do with clock PPQN resolution between the 2 devices.
The issue only appears when the Deluge sequencer plays. I'll be trying some different PPQN values tomorrow but I did try 192ppqn earlier with no success. Thanks I really hope I can get this sorted

reza

try less numbers and in multiples of 4 too. 4, 8, 16, etc. good luck!

Glynn

reza it worked thanks! I've settled on a PPQN value of 8. It's not sample accurate haha but certainly usable. My only concern now is in a weeks time when I also connect it to microfreak and nts1 if they will all play nicely together at this PPQN setting.