Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Too_Mere
About
- Username
- Too_Mere
- Location
- Chicago, IL, USA
- Joined
- Visits
- 3,920
- Last Active
- Roles
- Beta Tester, Mentor
- Points
- 33
- Location
- Chicago, IL, USA
- YouTube
- https://www.youtube.com/channel/UCnR9j0p9ASp2pR6usJjJ3Rg
- Music Streaming Link (if applicable)
- https://m.soundcloud.com/meremush
- Music Download Link (if applicable)
- https://meremush.bandcamp.com
- Posts
- 993
- 4
- Badges
Comments
-
Using the loop command from a MIDI controller should do exactly this. It creates a new audio clip with the same input as the previous and begins recording, ending when you stop it. It won’t have monitoring on because that would double the monitori…
-
No prob 👍🏼
-
Yes, that’s correct. Once learned, you can change the preset or even change to a MIDI clip and the MIDI assignment to the clip will remain.
-
If you don’t plan on using a second MIDI controller I’d recommend setting up templates with the pitch bend mapped then.
-
I meant using a different controller (same channel) that can send note data. You need to send MIDI notes in order to learn to the synth, including the pitch bend.
-
If you learn to a synth with a different MIDI controller, that can send MIDI channel as the pitch bend, that should allow the pitch bend to work. If you don’t have another MIDI controller you can use a DAW or the deluge itself by connecting its MI…
-
Hitting undo will delete all automation done since hitting record. But there’s no specific way to clear all automation in a clip. Like you say, you can always reload the song. Save often! :-)
-
No problem! Just hold learn and press the horizontal knob to copy. Hold shift + learn then press horizontal knob to paste. It will copy all notes within the currently visible time selection. And make sure you paste at the same vertical positio…
-
@Icoustik said: You can add tracks directly to the arranger (press an empty audition pad in arranger), and clips won't show up in song view I think they’re trying to copy a white clip to another place in the timeline. Like using the …
-
I think my new battery took around 12+ hours to fully charge. Just keep it plugged as long as possible and it should get there eventually. After the first time it should charge more quickly. If it never goes green I’d consider replacing the bat…
-
@ooijj said: Thanks @Too_Mere that works. It's actually on p241 of the Official Guidebook, but kinda small print so I missed it. No prob 👍🏼
-
Best way is to move the clip to song view (hold clip + song button). Then return to arranger and it’ll now have a color that can be placed anywhere in the timeline. White clips are otherwise unique and can’t be copied.
-
@ooijj said: Hey @Sam regarding your comment: 4) It's not currently possible to send program changes from the Deluge, sorry. Is this still the case? I'm trying to assign midi channels to some Chase Bliss pedals. By defau…
-
Have you made sure it’s not an issue with cables, speakers or other gear connecting the audio? Does it sound normal if just plugged to L/mono out instead of stereo? There’s no settings I know that would cause this so it’s likely a hardware issue…
-
That’s not quite correct. When fully charged it should stay green while still plugged into power.
-
@Icoustik said: @Too_Mere said: @hexagon5un said: Do I misunderstand? (I still don't think I see what Too_Mere's solution does, which makes me nervous b/c he knows a lot more about the Deluge than I do..…
-
Even without any clicks or pops, I don’t imagine you’d want the reverb tail to get cut off the way you describe. I would highly recommend using one the above mentioned methods to include the tail into the beginning of a loop.
-
I’ll add that if the synth you’re recording has tails past the loop end it’s usually a good idea to record after the first loop passes so the tails aren’t cut off.
-
I just tried what you described and I’m not getting a click/pop. I tried both including the tail in the first recording pass and not including it. If you want to do a collect all save and send the files to me I can take a look and maybe spot the …
-
Are you on the latest firmware release (3.1.5)? You can check this in the settings menu. If there are still clicks with start and end markers on zero crossings, I’d wonder it’s the audio itself. Have you made sure you have appropriate headroom…
-
Hard to know the cause of the problem in this specific case. But you can probably correct this by moving the start marker in waveform view (using the waveform shortcut). Just zoom in and moving it a bit closer to a zero crossing should do the trick.…
-
A new battery can take a VERY long time to charge the first time. As long as it’s staying solid yellow (not flashing green and yellow) I would just keep it charging a while longer.
-
@hexagon5un said: Do I misunderstand? (I still don't think I see what Too_Mere's solution does, which makes me nervous b/c he knows a lot more about the Deluge than I do...) Connecting the deluge MIDI output to its own input is a tri…
-
Ahh then yeah, that’s right. Only way to capture that type of performance would be with resampling. Happy to help!
-
Record to arranger (in song view, hold rec + press song) records the launching and muting of clips. Record to arranger also records parameter automation as well as notes played from MIDI.
-
No problem 👍🏼
-
@Gasher said: ... but the Learn-function doesn't work in my case and MPE is fine, but won't solve the problem ... so ... no workaround or whatsoever? The 400$-MIDI-controller Expressive E Touche is not functioning with the Deluge? That's disappoi…
-
Yeah it looks like those files are 44.1khz/24bit. No reason they shouldn’t work that I can tell. You should send them to @rohan to have a look I think.
-
That’s not how the deluge works. You need to use learn to map parameters to your controller. MPE support is planned for firmware 3.2, which should be coming soon :-)
-
Go to the settings menu under MIDI > CLOCk > OUT and set to OFF. Can turn off IN as well to avoid being stopped.