Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Alter
About
- Username
- Alter
- Location
- Tokyo
- Joined
- Visits
- 1,445
- Last Active
- Roles
- No Roles
- Points
- 17
- Location
- Tokyo
- Posts
- 100
- 3
- Badges
Comments
-
@SirAdrianFish said: 12.9 MIDI OUT within Kits & Songs, the CLIP MIDI CHANNEL WITHIN SONG VIEW In the kit clip, just press the MIDI button, and turn select knob to select the MIDI channel. In addition, on the MPC, when you set arm…
-
@Affectionate_Bee_781 said: @safrosch said: My question is, is there a capability for the Deluge to live loops tracks of different lengths, without setting the clip length first. .. So for instance, if I started to record a live-l…
-
@SirAdrianFish said: So it is only possible to transfer the tracks one by one and not all tracks at once? You can record multiple tracks of MIDI at once. Set the input MIDI channel for each track and arm all tracks.
-
@safrosch said: So if, for instance, the above track was set to be 17 beats long (4.1.0 in your notation I believe), would the below loop track quantize to that length? Yes, it will.
-
In videos I have seen, the end of the loop will be quantized to 4/4 time, so when you hit the launch button to end the loop, it will automatically sync to the 4/4 time. This method is quantized to the length of the above track. It is not alw…
-
@SirAdrianFish said: Lets say, I have created a project on the Synthstrom Deluge containing 5 tracks (3 x Drums: BD, SD, HH + 2 x Synths). Is it possible to send the MIDI control signals off all 5 tracks and save these 5 tracks on the MPC One as …
-
Try the following: * Connect the MPC's MIDI out to the Deluge MIDI in with a MIDI cable. * Set the MPC's sync-send setting to "MIDI Clock". * Connect Deluge audio out to the MPC's audio in with audio cabels. * On the MPC, use the Looper/Audi…
-
You could use external equipment that can automate tempo as a master and sync deluge as a slave.
-
@blindcinema said: Is it possible to set up a number of audio tracks with MIDI assignments for mute/unmute, level, efx, etc and then live loop directly into them? Trying to work up a RC-505 type of workflow on the Deluge. Thanks! I…
-
I contacted Synthstrom about this DC power issue and they said my OLED deluge needs to be repaired. The repair process took approximately two weeks (plus two weeks for shipping round-trip). Since the repair report was not attached, I don't know t…
-
Deluge does not have a feature to display or edit automation on the grid. You have to turn knobs in real time to record and edit automations.
-
@SynthStudio said: and I generate two random words. Polyend play has this random naming feature, which is a tiny trick, but fun.
-
8 We have closed the ‘feature suggestions’ thread until April 2022. Is it still prohibited?
-
I agree. I also think deluge needs a feature/option that the active clip accepts all MIDI channels.
-
Try the following: 1. Mute the clip1 on song mode 2. Enter clip2 and press the Load + Synth button 3. Select the preset of the clip1 Or just duplicate the clip1.
-
Just use 1.5mm hex key. https://youtu.be/M5Go-ReaJEw?t=29 In the video, a Torx screwdriver is used, but I think it is better to use a hex key. If "gold knob" means an encoder on the main board, I don't know how to replace it.
-
Interesting! A folding clip feature would also be nice. This view is similar to the variation view of Polyend Play.
-
On OLED 4.1.3, you can select the patch by pressing the Load + Synth button at step 7.
-
Sorry, there is no way to search subfolders.
-
You can do incremental search by pressing the pad in browser mode.
-
When using MPC/MPC Beats autosampler, samples are properly tagged and avoid deluge pitch detection.
-
Just save the song, and the recorded sample will appear in the CLIPS folder. When the song is unsaved, the recorded samples are stored in an inaccessible folder (CLIPS/Temp/).
-
* Entire waveform in the waveform editor * 3 octave * 8 bar piano roll in the clip mode
-
I think we could change the track name in arranger mode.
-
@seangoodvibes said: It does not crash if I load a kit folder with multiple kit presets that I can scroll through It seems that deluge crashes when scrolling with only one item in the folder.
-
"Randomize" in polyend play means to swap samples or shift pitches / filters / etc randomly at each step.
-
My answer also meant the same as Too_Mere. On a side note, if you are using non-OLED deluge and want to share the same kit for clipA and clipB, you can mute one clip and the other will select the same kit. https://youtu.be/aNBUDid9FiU?t=838 …
-
When making a variation, duplicate the clip and its kit will be shared. (in song mode, press a source clip row pad + empty row pad)
-
You can overwrite the "zzzzz" kit in variation B. Just to confirm, is 'variation' a song or a clip in the same song? I thought it was a song...
-
The "clone" loading option (select a kit and long press the load button) allows you to refresh the kit even if the names of the kits are the same. Save the kit in variation B and load it with clone option in varioation A.