Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines

Stereo/Mono % amount

14

The Deluge has a Stereo on/off function, but it would be great if we could also set the stereo amount, like in Abletons 'Utility' plugin which lets you set the amount from 0% (mono) right up to 200% (full width stereo) with 100% stereo being the default.

This helps a lot in creating space in the mix, and stops all the sounds fighting for the same space in the stereo field.

Comments

  • 0
    cypher79cypher79 UKPosts: 157

    Bump

    This feature would be really useful imo, it's basically a Stereo Imager and probably not that difficult to implement (I'm assuming so anyway)

  • 0
    minigoatminigoat cincinnati ohio usaPosts: 296

    +1

  • 0
    StijeStije NetherlandsPosts: 14

    there is a panning function.....so you can already make room in the stereo field....

  • 0
    cypher79cypher79 UKPosts: 157

    @Stije said:
    there is a panning function.....so you can already make room in the stereo field....

    Panning is not the same thing as Stereo Imaging.

  • 0
    StijeStije NetherlandsPosts: 14

    i know....but you can create room in your stereo.....that is all i am saying...

  • 1
    ChrisfreeqChrisfreeq NorwayPosts: 25
    edited December 2018

    +11
    Would also be cool to then have a cutoff-control for the width, to make certain parts of the spectrum mono and the rest remain stereo. You could then mono the lower frequencies of a bass or a kick, and still have it big and wide in the tops.

    A good reference for this is the TP Basslane VST by Tone Projects.

    Post edited by Chrisfreeq on
  • 0
    IcoustikIcoustik NorwayModerator, Beta Tester, Mentor Posts: 1,017

    Interesting!

    ~ Distinguished Delugate ᕕ( ◎_◎)ᕗ

  • 0
    magneticummagneticum Posts: 32

    @cypher79 said:
    The Deluge has a Stereo on/off function, but it would be great if we could also set the stereo amount, like in Abletons 'Utility' plugin which lets you set the amount from 0% (mono) right up to 200% (full width stereo) with 100% stereo being the default.

    This helps a lot in creating space in the mix, and stops all the sounds fighting for the same space in the stereo field.

    Yes, this is what I wanted too to be Stereo Spread (Width) option for individual instruments for better mixing. Do they have it already in firmware v.3?

  • 0
    cypher79cypher79 UKPosts: 157

    @magneticum said:

    Yes, this is what I wanted too to be Stereo Spread (Width) option for individual instruments for better mixing. Do they have it already in firmware v.3?

    There's been no mention of it, so I wouldn't expect it.....and I think I was wrong about the stereo on/off, I believe that option is only for the Delay....so it looks like all samples are stereo....not great for kicks and sub bass.

  • 0
    magneticummagneticum Posts: 32
    edited July 2019

    Hello, I got my Deluge and there is the "Width" parameter. I though that is for synth but it is really for reverb.
    So let's ask for this feature to have percentage of width of a specific track.

    @cypher79 said:

    There's been no mention of it, so I wouldn't expect it.....and I think I was wrong about the stereo on/off, I believe that option is only for the Delay....so it looks like all samples are stereo....not great for kicks and sub bass.

    Post edited by magneticum on
  • 0
    magneticummagneticum Posts: 32

    @cypher79 said:
    The Deluge has a Stereo on/off function

    Hello, where is this setting is located and is it applicable to separate synth tracks?

  • 0
    cypher79cypher79 UKPosts: 157

    @magneticum said:

    Hello, where is this setting is located and is it applicable to separate synth tracks?

    It's the 'stereo' shortcut on the right hand side of the pads, second row in.....and like I said, I believe it's only for the delay. For widening synths, you should try the 'unison' or 'polyphony' shortcuts.

  • 0
    magneticummagneticum Posts: 32

    Unfortunately I did not find the mono/stereo setting of the synth...

  • 0
    duelinmarkersduelinmarkers Austin TX USPosts: 137

    @magneticum said:
    Unfortunately I did not find the mono/stereo setting of the synth...

    There isn't one. The stereo on/off previously referred to only switches the delay between ping-pong and normal.

Sign In or Register to comment.