Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Sam
About
- Username
- Sam
- Location
- Wellington
- Joined
- Visits
- 244
- Last Active
- Roles
- Moderator, Staff
- Points
- 17
- Location
- Wellington
- Posts
- 160
- 3
- Badges
Comments
-
Hi @minigoat! Not currently, although I'd recommend posting this on the suggestions forum, as others might also find this a valuable idea
-
@martyncottey @amiga909 I'd recommend putting these on the suggestions section of the forum. I can't promise anything, but there's a much better chance of them being considered for new firmware if they're under that section, (plus others are more li…
-
Hi @pechnatunk! Generally, the firmware updates are designed to be backwards compatible with the shortcuts. There's no way to 100% guarantee this, but the shortcuts were also designed with the intention of being compatible with future updates, so…
-
Hi @martyncottey! Yeah, you're correct, 12 song sections is the limit, however the amount of tracks within each is only limited by RAM. It's 12 because past that point, the colour shades become too similar to be able to tell each section apart.
-
Hi @Alex! Yes, the Deluge always sends out of both USB and DIN ports simultaneously
-
Hi @NevinD! Glad to let you know that this feature does already exist You want to change the sample "MODE", which can be done by holding down either shift (with the sample you want already selected) or the sample's audition pad, and then pressin…
-
Hi @flutehead! If you just recorded a sample live, it should be in a folder labeled "RECORD", which in the "SAMPLES" folder along with "DRUMS". Press the select knob to enter into a folder, turn it to browse through the current folder and use the ba…
-
Hi @DCBB! Yes! You can program notes polyphonically just as you would in a DAW piano roll, with the number of voices only limited by CPU
-
Hi @Nelson_Baboon! Glad you got it out and thanks for the feedback Is it working properly now? Has the CARD error gone away?
-
Hi @imekon! Thanks for posting! Like @Icoustik, my guess would be that you might have had files in the highest level of the card, or accidentally pressed the back button more than once (this can be surprisingly easy to do if your finger wobbles the …
-
Hi @Puppeteer! I'm not entirely sure if I understand your question correctly, but the Sync parameter sets the mid-point for the Delay Time parameter's gold knob. This is synced to the Deluge's current tempo. So, if the Deluge is currently slaved to …
-
Hi @minigoat! I'm just jumping in to confirm that you can't overcharge the Deluge. You should be able to keep it plugged in for as long as you need
-
Hi @martyncottey! The ordering issue is a known bug that should have been addressed in one of the firmware updates. Have you tried with the latest 1.3.2 firmware? It can be found here: https://synthstrom.com/product/deluge/#downloads As for savin…
-
Hey @remy_luisant! If you inserted it on too much of an angle, you might have inserted the card underneath the board. Don't touch the front screws. You can unscrew the back (after unscrewing the nuts for the output jacks etc...), and this should let…
-
Hey @remy_luisant! Interesting points, however this "bug" is intentional. Thanks for the feedback though, it's always good to know more about how the user base is finding the Deluge
-
@alien_brain @MatthewGeorge Sorry, I should have been clearer! You're correct in that there's no way to view the number and record automation at the same time. At the moment that would have to be by ear. It's a good feature request, though!
-
Thought I should just add that transposition doesn't have to be done by ear - you can view how much you're transposing by through the shortcut system on the edit pads. Try shift-pressing OSC1/Transpose down in the bottom left-hand corner, then use t…
-
Hi @martyncottey! At a guess, do you have anything plugged into the line in jack? As @Icoustik mentioned, this could cause pretty much exactly the issue you're describing. If not, could you describe the process you're using for recording and what se…
-
@neilbaldwin created one for delay times a while back: https://docs.google.com/spreadsheets/d/1iLUgbdxa2a5v9VNXW_PB9WshcUiUMJONMPHuF6j_tys/edit#gid=0
-
Hi @donato! You're correct about the song length - you could have __well __over 1920 steps haha. The Deluge doesn't pattern chain in the way a lot of other sequencers do. Instead, different sections can be automated to play for a certain number of b…
-
Hi @Toumal! If you have any suggestions (such as this) for upcoming firmware releases, feel free to post them in the Software Suggestions part of the forum, which can be found here: http://forums.synthstrom.com/categories/deluge-suggestions Ro…
-
Hi @oldgearguy! Sorry, that was unclear! The page numbers I'm referencing are just the "google docs" page numbers, that you can see on the online manual by hovering over the sidebar. The paper manuals not having numbers was a mistake on our part and…
-
Hi @Eddy! This function is to delete any recorded parameter automation that might be modulating the gold knob's effect. You can read about it more on page 19 of the manual https://docs.google.com/document/d/1FAeJ5f1sl3kKJgvbKmGRe3PIMjkaYrh3eAXF0…
-
Hi @amiga909! All that switching Affect Entire off while in Song Mode will do is deactivate the gold knobs for editing - helpful if you're worried about knocking them and also as a reference if you're editing per-track effects in song mode by holdin…
-
Hi @oldgearguy! These are some great points and I'd recommend you copy a few of them over into the software suggestions forum. Unfortunately there's currently no way to restrict the range in quite the way you're talking about, but I can see how it w…
-
Hi @alien_brain! It's unlikely that the shortcuts will change from what's on the printed units. If, for some reason in the future, there ever is a change, we'd likely sell updated overlays on the site. Like I said, though, a change is fairly unlikel…
-
Hi @GibbousHominid! Sorry it's taken me a while to get back to you! Unfortunately there's no way to map the push function to different settings at the moment. Different parameters (like LPF Freq.) have push functions that are mapped along with the t…
-
Hi @alien_brain! Sorry it's taken me a while to get back to you, but yes! It's possible to buy one on our site. We have a new printed version for firmware V1.3.0 (including V1.3.1). Link below: https://synthstrom.com/product/deluge-manual/
-
Hi @tubbs! Keyboard tracking is setup through using the "NOTE" parameter to modulate another parameter. So in order to remove it, go to the effect that you want to change (say, filter frequency) in the sound editor. Click into it to get to the numer…
-
Thanks for that, @pmags! I've alerted Rohan to the issue