Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
uke4peace
About
- Username
- uke4peace
- Location
- SoCal
- Joined
- Visits
- 79
- Last Active
- Roles
- No Roles
- Points
- 7
- Location
- SoCal
- Posts
- 13
- 2
- Badges
Comments
-
@uke4peace said: @lcoustik Thank you for these. They sound great. However, some are not working correctly. For example, Brass Ensemble in the xml file points to a folder in Multi that does not exist? edit: Harp2 rr1, Harp2 rr2, Vibes!, Vib…
-
@lcoustik Thank you for these. They sound great. However, some are not working correctly. For example, Brass Ensemble in the xml file points to a folder in Multi that does not exist? edit: Harp2 rr1, Harp2 rr2, Vibes!, Vibes2 are other kits where…
-
There are non files in these folders.
-
Temp fix, used a folded piece of paper to wedge the volume pot in place. Working good so far!
-
@reza said: great ! seems like the factory card contents that synthstrom provides have a couple messed up sample locations then. if you run into any others, it would be super helpful if you list them here (preset name & sample name tha…
-
@reza said: 3mm grubscrew with a 1.5mm hex head. there's possibly a chance that the screw is still inside the knob, if you get a 1.5mm hex you can stick it in and see if you can simply tighten it. Thank you. Screw popped out, went AWOL...…
-
@reza I discovered the problem and fixed it. In the kit XML file for Chaz Bundick, it references fileNAMEs "CB1‐BD~1 WAV" and "CB2-BD~1 WAV" I changed them to match the actual sample names and now the KIC1 and KIC2 are working.
-
Edit: @reza thanks for the file names. So I checked. Everything is arranged as it should be. The files are there. Yet no sound. There was at least one other default kit missing a sound too. I forget which but I figure if I can resolve the Chaz Bu…
-
@reza yo! Appreciate the follow up! I'll be responding to your DM shortly. So Chaz Bundick kicks are still not working. I downloaded the factory presets. Replaced the default kits (using MacBook copy and replace all option), drum samples and Chaz…
-
@reza Thank you for the follow up and the guidance. Pad levels and filters were the first thing I checked. But I am only about a week old to Deluge so def possible I missed something. There were other kits that were missing some pad sounds. I hel…
-
@o_o said: I think the Deluge even worked to power the Linny when the Linny was in low power mode. 👍 Yes, I have used it and can confirm the Deluge powers a full-size Linnstrument. I think it even works in "normal" (full po…