Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
RhyminGarFunkle
About
- Username
- RhyminGarFunkle
- Location
- Tucson, AZ
- Joined
- Visits
- 235
- Last Active
- Roles
- No Roles
- Points
- 7
- Location
- Tucson, AZ
- Posts
- 16
- 2
- Badges
Comments
-
After experimenting a bit (just with my controller's aftertouch, I don't have a Linnstrument), I'm not certain if you can get exactly the behavior you're after - with zero pressure the volume is 0, and at maximum pressure the volume is also maxed. I…
-
Awesome news! It's actually my birthday today and I don't usually like to celebrate it but this is a pretty cool present. The producers guide sounds amazing, is it going to be free to Deluge owners in digital form?
-
@Kenoubi said: I've used a really slow square wave LFO as an effectively constant value, but it probably can't go slow enough to use it for this kind of purpose... I just tested, at the slowest setting the square LFO takes about 1:42 to g…
-
Alternately, just set the mix volume via the oscillator volumes and keep controlling the master with the controller, so that a volume of 50 is the final mix volume. Or go really low-tech, put some masking tape on your MIDI controller and mark the po…
-
@realms_of_chaos said: Also possibly a Volca Drum, because I'm not sure if it's possible to coax these kind of crazy warped drum sounds out of the Deluge synth engine (I'll be experimenting to see if I can first). Honestly with the en…
-
I also found the front panel installation to be very simple and straightforward, taking a bit over an hour. The most difficult thing was the PCB screws, which were on very tight - I nearly stripped a couple and if the hardware store had been open wh…
-
@Ian_Jorgensen I got an email yesterday saying that my top panel order is being processed, even though I put the order in two months ago. Is this a glitch, or are the top panels being shipped?
-
How thick are the magnetic overlays? Are they flush, or nearly flush, with the buttons? EDIT: Also, will replacing the overlay remove the warranty for anything that might go wrong, or only things that are a direct result of improper installation?
-
You can get some microtonal stuff going on by sequencing the transpose parameter, but it's not super easy to do complicated stuff that way - you'd need to cut and copy the note to have another with the exact same pitch, for example. It's certainly n…
-
Set the "portamento" of the synth to something above 0, and it'll smoothly slide from whatever note you press to whatever other note you press, no matter how many octaves. You'll need to hold down the second note longer if the portamento value is ve…
-
@cypher79 said: Simple solution here would be to resample one of the tracks, and use that new sample instead of one the cloned synths. Except for CPU management, how would that be a better solution than having the tracks use different num…