Brak
About
- Username
- Brak
- Location
- France
- Joined
- Visits
- 6
- Last Active
- Roles
- No Roles
- Points
- 2
- Location
- France
- Posts
- 2
- 1
- Badges
-
Deluge and Expressive-e Osmose
@drbourbon Thank you for the advise. I am going to check it.
In the mean time since I was suspecting issue with usb midi output I have also tried to connect output with MIDI DIN, and after making some tests to tune the settings I got the following setup that works quite well:
- Deluge Settings -> MIDI -> Devices -> Osmose -> MPE -> IN -> Lower -> 15 (with 14 some notes were not playing)
- Deluge Settings -> MIDI -> Devices -> Osmose -> MPE -> IN -> Upper -> 0
- Deluge Settings -> MIDI -> Devices -> Osmose -> MPE -> OUT -> Lower -> 0
- Deluge Settings -> MIDI -> Devices -> Osmose -> MPE -> OUT -> Upper -> 0
- Deluge Settings -> MIDI -> Devices -> DIN -> MPE -> IN -> Lower -> 0
- Deluge Settings -> MIDI -> Devices -> DIN -> MPE -> IN -> Upper -> 0
- Deluge Settings -> MIDI -> Devices -> DIN -> MPE -> OUT -> Lower -> 13 (with higher value I noticed some glitches but maybe it is not the optimal value)
- Deluge Settings -> MIDI -> Devices -> DIN -> MPE -> OUT -> Upper -> 0
- Osmose Global Setting -> midi i/o -> ext clock source 3/3 din
- Osmose Global Setting -> midi i/o -> usb haken mode 3/3 disabled
- Osmose Global Setting -> midi i/o -> haken local control on
- Osmose Global Setting -> midi i/o -> DIN mode -> 2/5 dsp in or 4/5 dsp in+thru
- Midi clip listening to Osmose and output set to MPE ZONE Lower
With that setup the playback is not always perfect (some small variations may happen), but I find it quite faithful to the original.
The crashes I got seems to occur even with DIN and when playing+recording MPE and changing the MPE parameters too much and/or changing midi output of the clip while it is playin. I will try to identify reproducible steps to make a bug report, but when recording and playing back at the same time MPE Deluge does not look really stable : I also got a crash at some point by pressing the up/down rotary and turning it (transpose). But was not able to reproduce it a second time...