Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
failing to sync TE PO32 via Gate3/4
030
SO36Posts: 16
in Deluge Help
i have spent nearly two hours now, yet without any true result.
does anyone sync the two units? deluge master—PO32 slave (set to sync2)
tried Gate3 > run, strig, vtrig— nothing...
any hints welcome!
Comments
Hi! Have you tried putting down some gate-notes/triggers in a kit track? I don't know if you can output a steady clicktrack automatically, but you can via a kit. I use sync4 on the PO-32 and put down triggers. Experiment with timing if you need to start your PO manually. Shift it a little.
yes of course, i programed triggers...setting up a gate track without triggers wouldn´t make much sense, would it?
anyway, i tried a variety of steps 16/16th, 8/8th...
yet nothing worked other than getting some strange behaviour with the PO.
PO kind of started but only the first 2 beats of a pattern, then it stops.
i´ll try sync4, maybe it does the trick.
more important though is getting my head around the Deluge...
Maybe you solved this already, but i connect from the gate1 out to the PO32. I think for gate 3 and 4 you have to manually set the track to that specific gate output.
actually, i did not solve it. wasn‘t and isn’t priority atm.
since i am on vacation and missed out somehow to take the PO (the D is with me though) into my backpack i have to try when arriving back home.
haven‘t had a look in here since i hang out on the FB group lately.
much more „traffic“ over there...
thank you for your hint , appreciated!
cheers