Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
Audio Routing Deluge - SP404 MKII - Back to Deluge
Federico
SwitzerlandPosts: 5
in Deluge Help
Hello everyone,
I would like to know how can I do the audio routing from the Deluge to SP404 to use the effects and the record back to Deluge to organise a song. I mean, is a way to do it directly and no doing a record in sp404, resampling, and the record again in Deluge?
Maybe I need to use midi or just audio clips is enough, or there are other more efficient ways to do it. Any idea or suggestion is very appreciated. Thanks!
Comments
this would likely create a feedback loop. if deluge is sending signal to the sp404, then the sp404 is receiving audio continuously from the deluge. if you are adding the 404's FX to the external input (the deluge's signal into the 404) and want to send the output of that **back ** into the deluge via it's stereo input, then an audio clip on the deluge could record the 404's output, but as it's doing so, those newly sent FX will then get sent back into the 404; thus creating a feedback loop.
one possible workaround is to work in mono with input signals are panned one direction and output signals are panned the other; so what is playing on the deluge is the left channel and what it receives is only in the right channel (you would manually pan clips this way into the deluge). this will likely be clunky and you'll likely make mistakes and need to problem solve this process to work the way you want. so basically, you need to play with this concept and experiment and see if you can commit the process to memory and do so efficiently.
Yes, does make sense....thanks a lot!
It might work if the master volume in the recorded clip was 0.
That way you could stay in stereo.