›
Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines

Deleting Synth Presets, Moving and Removing Drum Samples from Kits

▲ 0 ▼
taktak Posts: 31
in General Discussion

I often get bogged down trying to do something that I think should be simple, and can't figure it out. Are of these possible, and if so, how?

  1. Is there a way to delete a synth preset from within the Deluge?
  2. Is there a way to remove a drum sample (i.e. free up the pad) from a kit within Deluge?
  3. Is there a way to move a drum sample to a different row in the kit like you can a synth note?

Comments

  • ▲ 4 ▼
    ceetronicceetronic Chepstow, South Wales, UKBeta Tester Posts: 62

    I can answer 1.

    Press load and enter the name of the patch to delete. Don't select it at this point

    Whilst the name of the patch is flashing, press Shift + Delete.

    You can then delete the patch.

  • ▲ 0 ▼
    taktak Posts: 31

    Thanks much @ceetronic

  • ▲ 3 ▼
    steamboatbillsteamboatbill Dundee, ScotlandPosts: 1

    For the other two:

    2) Hold a pad on the main grid on the same row as the sample, then it's Shift + Delete to remove the notes and clear the sample (same as deleting a clip from Song View).

    3) Hold the audition pad for the sample, hold down the up / down knob and twist.

  • ▲ 0 ▼
    taktak Posts: 31

    Thanks @steamboatbill - not sure why those didn't cross my mind.

  • ▲ 0 ▼
    MichaelMichael CanadaPosts: 10

    @ceetronic said:
    I can answer 1.

    Press load and enter the name of the patch to delete. Don't select it at this point

    Whilst the name of the patch is flashing, press Shift + Delete.

    You can then delete the patch.

    Thanks so much for this, this was driving me crazy! I just could not find these steps in the manual. Are they there?

  • ▲ 0 ▼
    MagicmixMagicmix United KingdomPosts: 17

    @Michael said:

    @ceetronic said:
    I can answer 1.

    Press load and enter the name of the patch to delete. Don't select it at this point

    Whilst the name of the patch is flashing, press Shift + Delete.

    You can then delete the patch.

    Thanks so much for this, this was driving me crazy! I just could not find these steps in the manual. Are they there?

    Doesn’t work for me. If I create a new synth but don’t load a wavetable, (or even if I do) it won’t delete. I often make mistakes on patch Loading and I’ve got 15 or so synths I can’t delete.

  • ▲ 0 ▼
    ceetronicceetronic Chepstow, South Wales, UKBeta Tester Posts: 62

    What does the display say when you try to delete a synth preset?

  • ▲ 0 ▼
    autophocusautophocus SacramentoPosts: 1
    edited November 2023

    @Magicmix said:

    @Michael said:

    @ceetronic said:
    I can answer 1.

    Press load and enter the name of the patch to delete. Don't select it at this point

    Whilst the name of the patch is flashing, press Shift + Delete.

    You can then delete the patch.

    Thanks so much for this, this was driving me crazy! I just could not find these steps in the manual. Are they there?

    Doesn’t work for me. If I create a new synth but don’t load a wavetable, (or even if I do) it won’t delete. I often make mistakes on patch Loading and I’ve got 15 or so synths I can’t delete.

    A bit of a late response but I found that I just needed this guidance.

    Assuming you are using the new OLED book, the deletion of a recording/sample can be found on page 173. It appears it is on the same page in the non-OLED book as well.

    DELETING A SAMPLE
    1. Press [SHIFT]+[Browse] (this is where you will see a "Bottom - Top" message.) Press the main select knob. This should get you into navigating your folders.
    2. Navigate to the sample to delete
    3. Press [SHIFT}+[DELETE] to delete
    4. Display will ask you to confirm deletion
    5. Press [Save] or (SELECT) to confirm
    6. Sample deletion complete

    Post edited by autophocus on
Sign In or Register to comment.