Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
phillipadsmith
About
- Username
- phillipadsmith
- Location
- United States
- Joined
- Visits
- 283
- Last Active
- Roles
- Beta Tester
- Points
- 8
- Location
- United States
- Posts
- 89
- 2
- Badges
Comments
-
@gejza said: Hi folks, anybody knows, what is the max section limitation per song? I mean how many different section can set in a song? I can recognize only 6 different colors. That means only 6 sections available per song? I can…
-
@Too_Mere said: There’s a couple levels of gain staging at play here. After the synth is sent to the Deluge it is affected by the clip level but the main variable here is the Deluge’s main output level. That is likely sending a lower gain than th…
-
Hey there @Kusho, I use both. My set-up sounds similar to yours. I send MIDI out from the Deluge over USB to two synths, and also take MIDI in over USB from two controllers (Keystep and Faderfox). Similar to @Metamere, I also send MIDI out fro…
-
@broughtonfilm said: I’m not sure how doing so helps? Can you explain? Question was about copying a row/instrument within a kit. I guess it depends on the context or use. If I wanted to create variations of a Kit's instrument(s), I woul…
-
@Icoustik said: 1. Use computer and edit the XML file - there's currently no way to copy kit rows on the Deluge Could you not save the Kit with a new name, then make the edits to the copy?
-
@Icoustik said: The Deluge has low volume output if one uses low default velocity (which really there's no good reason to do). Set default velocity to max and the volume will be fine. I never go past 2 o'clock on my Del and easily get up to th…
-
@Too_Mere said: Editing the xml files is very possible. But I’m not aware of any scripts made/shared that can do specifically this. There should be one. I can help with that if it really doesn't exist (which would be hard to believe!). …
-
@Affectionate_Bee_781 said: Song view. Affect entire. Volume down between 25-50%. (Save as template song). Make up the volume from the Deluge master volume and/or a mixer. Deluge has relatively low volume output. This is the way. Ah-ha, s…
-
@Icoustik said: Generally I advise turning down affect entire song volume to the middle in one's song template to create good headroom when using max velocity as default and normalized samples/ loud ones. Can you say more about how yo…
-
@Too_Mere said: Were you using an external MIDI controller? Was the note velocity 64 or lower? Nope. As mentioned, I was sampling in from an audio source into a Kit row. Kit > New Kit > Shift-Record > Play audio > Record again…
-
@Too_Mere said: @Affectionate_Bee_781 said: Do you have the LPF in 'drive' mode on the kit or a row in the kit? Are you using any saturation FX? These are both very sensitive to the OSC levels This is true. Also normal…
-
@Too_Mere said: Try turning down the osc level. It may have to do with other patch settings too. If it’s not clipping at the input anyway Well, this is a Kit not a Synth, so I'm not sure what other settings would be involved? However, …
-
@Too_Mere said: Normalization shouldn’t cause clipping. If you turn down the oscillator and/or the master level of the sample do you still hear clipping? Correct. If I turn down the master level for the row I still hear the clipping (at a…
-
@volsteh said: hold "note/step" pad and hit delete Doh -- so obvious! Thank you.
-
@hexagon5un said: @Too_Mere said: If you’re trying to slice to rhythmic values you should first have the sample trimmed to the correct length, resample, then slice. That's really the tip. And to elaborate just a tiny …
-
@Too_Mere said: If you’re trying to slice to rhythmic values you should first have the sample trimmed to the correct length, resample, then slice. Ah-ha! That's a great tip! 🙏
-
@Too_Mere said: Personally, when I’m using sampled material that includes its own rhythm. I play with the sample’s transposition and the Deluge tempo to find the groove. Ah, so you change the Deluge song tempo, which has a finer resolutio…
-
@Icoustik said: Note: Please keep in mind that resampling a song to SD will take up a bit of CPU so watch out for voice drop-outs etc. in songs with a bunch of stuff going on I try to "bounce" most clips to an audio track (mute the synth/…
-
Smart!
-
@hexagon5un said: I definitely understand why you'd want faders to be consistent, but the problem is that you might want them to be consistent so many different ways. I'm finding for basic drum Kits, I pretty much always want them to be…
-
Thanks for the input @Icoustik & @neilbaldwin! Thanks to your comments, I believe I've found a solution to this (for me at least). Given that the Kits and Synth presets are just XML files, I did a bit of investigation and experimentation …
-
@Icoustik said: I'm going to have to give this a try again to get my head around it. Is the Deluge is looking for transients within that recording and using it to set the tempo? No, the length of the clip defines the tempo …
-
@Icoustik said: 1) If you record into an empty audio clip from start (like you said) without any other clips unmuted/ going on, then your loop will be as long as you make it, and once closed, will set the tempo of the song. I'm going to h…
-
@Icoustik Following up on the above thread, the two things I'm still trying to get my head around are: 1) Using the audio clip to live loop, it seems that the length is whatever I record. If I hit record, then hit play, then play in a bassline fr…
-
Quick update to say that I'm all sorted: Picked up this inexpensive four-port USB hub (with one extra port that is just for power, which is providing power to the Deluge). Everything works as expected now. Everything talks to everything else via …
-
@Icoustik said: There are several differences, normalizing being an important one. Other ones: * Audio clips can be live-looped, resamples cannot. * Resamples can be accessed instantly in the browser after recording, while audio cli…
-
@Icoustik said: Let's be clear about the terms please; If you're using hold Record + press Play, you are in fact not recording to an audio clip, you are resampling. While if you however have an empty clip in song view which is unmuted, have Recor…
-
@Kenoubi said: I tested this one by one, see the Parameters tab in my spreadsheet. @Kenoubi: Epic! Thank you! 🙏
-
@Icoustik said: Personally, I mostly don't use the Deluge as host, because I use an ipad+hub-->Deluge and route connections via an app called Midiflow. This way, I'm able to use all ports of a powered 10-port hub (its actually a 7 with an …
-
@Icoustik said: 2) It seems the Circuit presents itself as a multi-hub in some way, and Delly can only handle 'basic' hubs with 4 USB connections or less. Hubs with more than 4 connections basically present themselves as e.g. 4+3 connections,…