Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines
funktree
About
- Username
- funktree
- Location
- NY
- Joined
- Visits
- 122
- Last Active
- Roles
- No Roles
- Points
- 22
- Location
- NY
- YouTube
- youtube.com/c/funktree
- Posts
- 128
- 3
- Badges
Comments
-
@funkymothers said: Out of interest was that with USB? I am getting a a 9V 1000mAh wall wart in the hope that it will speed up the charging process. yes USB sorry for late response
-
@TactileAF said: Good for drums too. You could do a basic 2 sample version of this if the OSC1 and OSC2 Volume-to-velocity mappings could be seperated Fully agree but the curve to flip the oscillators volume is still linear. A bit awkwar…
-
Yes why would I need to hookup a Strymon or RV-500 to a this nice machine ? BTW try to set SIZE>45 and WIDT < 50 and DAMP < 50 I get a pretty good results ... Somehow the WIDT=50 has strange artificial vibe to it.
-
How about SIDE chain... I use SIDE chain compressor as 3rd ADSR, yes I know it is not “automatic” based on the level but you can control every single sequenced step (yes you need to change the drum kit to have two kicks: one that you hear and one “…
-
I have good results on Delay effect to do BPM. Set the sync note to 1/8 and RATE to 18-19 to do some 3/16. The second one I use for BPM delay is sync note 1/16 and RATE=12 but that is not triple one:). The LFO2 will most likely not have a sync opt…
-
Clearly “...love is in the air...”
-
@Myrk said: I prefer the way the Arturia Beatstep and DrumBrute do it with Randomness and Probability across the whole beat or per note/instrument. Done on a % scale as well, but would also work on the midi spectrum (0-127) I played with …
-
As of now, we cannot change the order of the effects/effect chain ...not yet:) ... but +1 to the effect presets One of the sound slots could be a default parameter preset eg: location 0 or 99. So any time I initialize a new sound the effect param…
-
amen
-
@rohan said: Hey Funktree. Interesting point you make about pulse waves having a DC offset which when combined with an LPF causes saturation not to work. As you say, an HPF before the saturation would fix this - I'll consider making that c…
-
You have 999 slots each with a-z combinations... that is a lot... I rather have better navigation among them. If you know holding down shift while changing the sound does jump over the a-z presets so that speeds things up. However, the rest of t…
-
you can still have a few SD cards for different lines of work.. 32G is sweet limit of most of the devices. I guess the programming, and the SD device changes if you go over 32G.
-
I use this trick for now: Modulate PAN with both RAND=10 and KEYTRACK=-25. -25 for a few then for other tracks use +25. This evenly spreads sound among two channels. So I don’t have all the bass notes in one channel. Then I do add a 3rd PAN modula…
-
the v 1.2 sounds great, but how about some of these: * There is some nasty bug in the DSP section with DC offset either on the mix matrix or before oscillator signal hits the distortion effect, the sound disappears when you using SQUARE OSC wi…
-
@OmskInfo said: I agree with qdemo. To mute a track in the Song mode should have the option to simply mute the events in the track while letting all envelopes and effects to continue to decay. I see you point... makes sense, I tweaked my …
-
same here, I think it is related to shipping... I suppose If we lose the screw and move the knob a bit up and tight it back ... haven’t got the chance to do it .BTW for me it is the bottom left golden knob ...
-
thaaaankss!!!
-
thanks can somebody suggest a few piano, guitar samples, I've tried to create it with the with FM and subtractive but not too happy with piano. The e-piano is doable by using two SQUARES oscillators but piano is not easy
-
Hosrstmaista, I’m sorry you’re right, I wrote it to one of my emails to Ian.....my apologies
-
Yes, the power LED should turn to red if the CPU/DSP has issue to render sounds or other resource related issues.
-
ohh I wish I was in EU/Netherlands... that must be so much fun
-
I assume you need to modulate internal DELUGE synth / sample sounds... To output the side chain as MIDI CC out messages is NOT possible. Unless you remap some CC and or use automation knobs the same way as you can do with electribe or circuit.
-
Here is a good start ... sky is the limit ... Sorry I cannot post files here... so below in white is the content of the SYNT xml file. You need to 1. copy the whole code... Don’t miss something. 2. Rname it to something like SYNT988.XML 3. P…
-
@Wendel said: ...Then press again, within 3 seconds, you can load the next ...A nice suggestion.... but it might not work in 3 seconds.. The DELUGE might need to load a lot of samples thus takes more than 3 seconds
-
Do this the other way around ... set both volumes to 25 and then the -50 on VELO modulation will work I believe... or you might need to do -25 +25 ... I know we don’t have AND/OR modifiers on deluge as korg radias or waldorf blofeld has. While o…
-
@Horstmaista said: Yes, this would be great. Also Midi arpeggiator and sidechain! Deluge can do sidechain too, what kind of sidechain you miss ? BTW I have not seen a device that has soo extensive side chain options, you can even modu…
-
@MatthewGeorge said: My other synth has some awesome modulated percussion sounds in it where the velocity determines the randomness of the pitch. deluge can do this. The VELO is one of the modulation sources on the oscillator tune and or …
-
If I understand correctly this is a sequencer modulated by sources so LFOs/ENV/VEL can drive pitch (in scale mode I assume), note length, track length ... correct ? Elaborate on this.. it seems like pretty damned good idea. If any of you own Pyram…
-
I would use double click on “other” notes/sequencer related shortcuts, such as : * velocity doubling * selecting whole row of notes for editing (veto,length) etc how about long hold eg. 3 seconds also when you start to work with modulat…