Please familiarise yourself with the forum, including policy on feature requests, rules & guidelines

Setting both OSC to play a Sample

0
EddyEddy Cologne, GermanyBeta Tester Posts: 292

In my opinion (and with Firmware Ver. 2.0) it is not possible to set both OSC to a sample, not the same and not to different ones.
I can only combine a Sample with some other Waveform (Sine/Tri/Square etc.)
Live Input can also be Input to just one OSC and it is always the Left Input, no chance to get a Line in to both OSC.
I could not find that limitation in the manual so I was a little surprised by that behaviour.

Comments

  • 1
    Ian_JorgensenIan_Jorgensen Wellington, New ZealandPosts: 614

    You can set different samples on each oscillator. Please explain your workflow and maybe we can see where you are going wrong.

  • 0
    EddyEddy Cologne, GermanyBeta Tester Posts: 292

    I should make a video of my workflow....
    maybe you can make one of yours?

  • 0
    Ian_JorgensenIan_Jorgensen Wellington, New ZealandPosts: 614

    My workflow is just the standard.
    Choose oscillator 1 type > set to SAMP > Browse > choose sample
    Choose oscillator 2 type > set to SAMP > Browse >choose sample

  • 0
    p_watsp_wats TorontoPosts: 111

    I'm still on 1.4 and was able to use different samples on each oscillator without issues.

  • 0
    EddyEddy Cologne, GermanyBeta Tester Posts: 292

    @Ian_Jorgensen said:
    My workflow is just the standard.
    Choose oscillator 1 type > set to SAMP > Browse > choose sample
    Choose oscillator 2 type > set to SAMP > Browse >choose sample

    it is the way I do, but I think software 2.0 has problems wit it

  • 0
    EddyEddy Cologne, GermanyBeta Tester Posts: 292
    edited June 2018

    I can load different Samples with the "Select Knob Menu Method" but not with the "Shortcut Shift Pad Method":
    If I try the "Shortcut Shift Pad Method" i don´t know how to load a sample to OSC2....i can hit Shift Browse but it affects only OSC1

    Post edited by Eddy on
  • 0
    MatthewGeorgeMatthewGeorge Cologne, GermanyBeta Tester Posts: 247

    OSC2's shortcut to browse is it's own button.

  • 0
    EddyEddy Cologne, GermanyBeta Tester Posts: 292

    @MatthewGeorge said:
    OSC2's shortcut to browse is it's own button.

    Shift OSC2....set to Sample.....blinkblink.....and then?

  • 0
    MatthewGeorgeMatthewGeorge Cologne, GermanyBeta Tester Posts: 247

    Shift Browse Sample 2 ... pick sample.

  • 0
    MatthewGeorgeMatthewGeorge Cologne, GermanyBeta Tester Posts: 247

  • 1
    EddyEddy Cologne, GermanyBeta Tester Posts: 292

    uuuh.......as you described: OSC2's shortcut to browse is it's own button.

    you mean: ...has it´s own button!
    and now i have found it. Thx a lot for the picture!

    ...and by the way - there is a dedicated OSC2 Record button as well :-)

Sign In or Register to comment.